DJI Neo (DJI Store) https://bit.ly/4gbER1a
DJI Neo (USA) https://amzn.to/47jkI53
Here is a detailed, step-by-step guide on how to update the firmware of the DJI Neo drone, using both available methods:
- Via DJI Assistant 2 software on a computer
- Via the remote controller and DJI Fly app
🚁 DJI Neo Firmware Update Guide
Keeping your drone’s firmware updated ensures smoother performance, access to new features, enhanced safety, and bug fixes. DJI offers two primary methods to update the firmware on the Neo:
🖥️ Method 1: Updating DJI Neo Using DJI Assistant 2 (Consumer Drones Series)
✅ What You’ll Need
- DJI Neo drone (fully charged or at least 50% battery)
- USB-C cable (data-capable)
- A Windows or macOS computer
- DJI Assistant 2 software installed (specific version for consumer drones)
- Stable internet connection
🔧 Step-by-Step Instructions
1. Prepare the Drone
- Power off the drone.
- Ensure it’s at least 50% charged to prevent interruptions during the update.
2. Launch DJI Assistant 2
- Open the DJI Assistant 2 software on your computer.
3. Connect the Drone to Your Computer
- Use a USB-C data cable to connect the drone to your computer.
- Turn on the drone.
- DJI Assistant 2 will detect the drone and display it on the screen.
4. Log In (If Prompted)
- Log into your DJI account in the Assistant 2 software, if required.
5. Select the DJI Neo from the List
- Click on the DJI Neo from the device list shown.
6. Check for Available Firmware
- A list of available firmware versions will appear.
- The latest firmware version will be at the top.
7. Start the Update
- Click the “Update” button next to the latest firmware.
- The software will begin downloading and installing the firmware to your drone.
- Progress will be shown on the screen.
8. Wait for Completion
- The drone may reboot during the process.
- Do not disconnect the cable or power off the drone during the update.
- When the process reaches 100%, a confirmation message will appear.
9. Restart the Drone
- Once complete, power off the drone and then power it back on to finalize the update.
10. Update Firmware for the Controller if Applicable
- Next you will need to update the firmware on the controller, follow the same steps to update the firmware as you did for the drone.
📱 Method 2: Updating DJI Neo Using the DJI Fly App and Remote Controller
✅ What You’ll Need
- DJI Neo drone
- DJI remote controller (RC-N2, RC 2, or compatible with screen)
- DJI Fly app installed on a smartphone or built-in to the smart controller
- Stable internet connection (Wi-Fi or mobile data)
- Fully charged batteries for both drone and controller
🔧 Step-by-Step Instructions
1. Power On All Devices
- Turn on the remote controller.
- Turn on the DJI Neo drone.
- Ensure both are connected (green indicator on the controller shows proper link).
- If using a smart controller, open the DJI Fly app directly. If using a smartphone, connect your phone to the controller and open the app.
2. Ensure Internet Access
- The Fly app must have an active internet connection to check for firmware updates.
- Use Wi-Fi or mobile data, depending on your device.
3. Wait for the Firmware Prompt
- After a few seconds, the DJI Fly app will automatically check for firmware updates.
- If an update is available, a firmware update notification will appear at the top of the screen.
4. Tap on the Firmware Notification
- Tap “Update” when prompted.
- The app will begin downloading the firmware package.
5. Begin the Update
- After downloading, the app will install the firmware to:
- The drone
- The remote controller
- Any connected batteries
🟡 Tip: If you have multiple batteries, each battery needs to be updated individually by powering the drone on with each one.
6. Wait and Do Not Interrupt
- The entire process can take 5–15 minutes depending on the speed of your internet and system.
- Do not power off the controller or drone during the update.
- Avoid switching apps or answering calls if using a smartphone.
7. Update Complete
- Once the update completes, the drone and controller may reboot automatically.
- A confirmation message will appear in the DJI Fly app.
- The app will then display the current firmware version under Settings > About.
🧠 Tips for a Smooth Update
- Always use official DJI accessories and firmware.
- Update in a cool, indoor environment to avoid overheating.
- Only update when batteries are above 50%.
- If using multiple batteries, repeat the firmware update with each battery inserted.
⚠️ What to Do If Firmware Update Fails
- Restart the app, controller, and drone.
- Ensure a stable internet connection.
- Use the DJI Assistant 2 method if the Fly app fails repeatedly.
- Try using a different USB cable or USB port if updating via computer.
✅ Final Thoughts
The DJI Neo drone can be easily kept up to date using either a computer with DJI Assistant 2 or wirelessly through the DJI Fly app. Both methods are effective, but the Fly app is more convenient for most users, especially when traveling. Regular firmware updates ensure you benefit from DJI’s latest performance improvements, stability fixes, and features.
