Connect with us

GoPro Gear / Accessories

The Complete Beginners Guide for the GoPro Hero (2018) | How To Get Started

Published

on

If you are a brand new owner of the new GoPro Hero 2018 or plan on getting one soon. Perhaps this is your very first GoPro and you are finding yourself a little overwhelmed on how to get started as GoPro includes very little documentation in the box. I have put together this very detail beginners guide for the GoPro Hero 2018 to help those who are new to get up and running quickly. This easy to follow beginners guide will help you understand the menu system and the different shooting modes. The new Hero 2018 is a great camera for beginners as it has a simplified menu with basic shooting modes. Watch our beginners guide for the new GoPro Hero (2018) on our YouTube Channel or below in our embedded video.

Our GoPro Hero Beginners Guide covers the following topics:

  • Unpacking the camera.
  • Installing the battery and memory card.
  • How to charge your GoPro Hero 2018.
  • Understanding the mounting system for GoPro’s.
  • Powering on for the first time and initial setup.
  • A look at the menu system and various shooting modes.
  • Basic settings for shooting video.
  • How to record video.
  • How to take pictures.
  • How to shoot bursts.
  • How to record a time-Lapse.
  • How to use the GoPro voice commands.
  • How to use quick capture.
  • GoPro gear for beginners.

Best Memory Card for the new GoPro Hero 2018

There are many types and sizes of memory cards on the market that will work with the new GoPro Hero 2018 but to keep things simple I recommend the Lexar 633x it is a great memory card at a decent price and I have always had good luck with them.  You can choose how much storage you would like the most common is 32 GB or 64 GB. This determines how many photos and videos can be stored on the camera.

Lexar 32 GB Memory Card (USA) https://amzn.to/2HClpuq
Lexar 32 GB Memory Card (CAN) https://amzn.to/2JL8PK8

Lexar 64 GB Memory Card (USA) https://amzn.to/2vgdSiD
Lexar 64 GB Memory Card (CAN) https://amzn.to/2HBPLxr

If you are a first time GoPro owner I have put together a list of GoPro gear that I think every first time GoPro owner should have in their camera kit.

GoPro Hero 2018 (USA) https://amzn.to/2vdi3vz
GoPro Hero 2018 (CAN) https://amzn.to/2qyoF1U

GoPro Camera Case (USA) https://amzn.to/2ENLeVq
GoPro Camera Case (CAN) https://amzn.to/2IZ0DVF

GoPro Shorty (USA) https://amzn.to/2EN5NRW
GoPro Shorty (CAN) https://amzn.to/2vlGd7k

GoPro Floating Handle (USA) https://amzn.to/2JKQHQI
GoPro Floating Handle (CAN) https://amzn.to/2qztiZP

GoPro Dual Charger (USA) https://amzn.to/2GXeXkG
GoPro Dual Charger (CAN) https://amzn.to/2vj8dbD

Manfrotto Extension Pole (USA) https://amzn.to/2HAPfQ6
Manfrotto Extension Pole (CAN) https://amzn.to/2HAhFd8

RAVPower Power Bank (USA) https://amzn.to/2qBbmxJ
RAVPower Power Bank (CAN) https://amzn.to/2qz3A7B

GoPro Handlebar Mount (USA) https://amzn.to/2JNNvne
GoPro Handlebar Mount (CAN) https://amzn.to/2vga8xB

Don’t hesitate to ask a question via any of my social media channels or right here on my blog!

Continue Reading
Click to comment

Leave a Reply

GoPro Gear / Accessories

When And Why To Use A Polarizing Filter With Your GoPro

Published

on

Ever wonder what a polarizing filter is and what it does? In this video, we are taking a look at a couple of polarization filters also knows as CPL’s for the GoPro Hero 5 Black and Hero 6 Black. These will also be compatible with the GoPro Hero 7 Black which will be released later this fall.

What Is A Polarizing Filter For Your GoPro

A polarizing filter is a filter that attaches to your GoPro and its purpose is to cut back reflections from shiny surfaces such as water, metallic surfaces, glass, even plants, and paved roads. When reflections are minimized your GoPro can capture deeper more true to life colors with more saturation and vibrancy. Filming on water is a perfect scenario. The glare from water can really desaturate the video or photo you take. By adding a polarizing filter the camera can record richer blues in the sky and the water itself. It can also in some situation make the water more transparent so you can film what lies beneath. Another good example is when filming yourself driving with your GoPro. If you have a GoPro mounted on a car on a bright day, the asphalt can be quite shiny. Using a CPL will cut back the glare on both the vehicle and the road leaving you with a beautiful video with deep vibrant colors. Myself I even use one when taking photos of my garden. Plant leaves can have a sheen on them. Using a CPL allows me to capture all the beautiful colors of the flowers easily.

TIP: In order to use a polarizing filter you must use it 90 degrees to the sun. So filming with the sun directly in front of you or behind you will have no polarization advantages when using a CPL with your GoPro.

What CPL Filter Is Right For You & Your GoPro

There are many CPL filters on the market for your GoPro, In this video a take a look at two. The first filter is by SandMarc which has a rotating dial that sets the polarization. The second one by Telesin has to be removed and rotated to set the desired polarization. I have used both extensively and I have found that both provide similar results with the quality of footage that is produced. The SandMarc filter is easier to use as you can just dial and rotate the filter to get the appropriate polarization, whereas the Telesin CPL must be removed and rotated manually. There is a large price difference between the two the SandMarc CPL runs about $39 and the Telesin comes in at $12. Even though its cheaper the Telesin polarizer filter also includes a lens cap to help protect the lens for smudges and scratches. One other nice feature the Telesin brand has is the ability to lock the lens on the GoPro via an Allen key and screw. This is important as the large lenses have been known to fly off when being used at high rates of speed, the wind velocity can work the lens off. There is no way to tighten the SandMarc polarizer filter. Just keep in mind over tightening the screw can leave marks on the GoPros finish.

Watch our demonstration video where we show you how to use and install these polarizing filters on your GoPro. We also include some sample footage showing you the difference of using a polarizing filter and not using one.

Currently, the Sandmarc CPLS are on Backorder I will add a link to it when it’s available.

Telesin CPL for Hero 5/6 Black: https://amzn.to/2xsAf2j

 

SandMarc CPL polarizing filter for your GoPro Hero 5/6 Black.

 

Telesin CPL polarizing filter for your GoPro Hero 5/6 Black.

 

Continue Reading

GoPro Gear / Accessories

Affordable YouTube Studio Lighting | FalconEyes SO-48TD Review

Published

on

If you are in the market for affordable lighting for you home YouTube studio you may just want to take a look at the FalconEyes SO-48TD, a high-quality light without a big price tag. If you are just starting out with creating YouTube content one of the most important thing besides your camera is lighting. If your filming outside this is not so much of an issue, but if your creating an indoor studio lighting is a crucial part of your setup.

There is a lot to choose from when it comes to lighting, some really cheap options, and some really expensive ones as well. If you’re just starting out you may want to choose some on the cheaper side, especially if you are just doing YouTube as a hobby and don’t want to invest a lot of money. I strongly recommend the FalconEyes SO-48TD. They can produce stunning results without breaking the bank. This series of lights come in 3 output sizes, a 28 watts, 48 watts and 68wattst. Anyone of these light would do the trick. There are many ways to set up the lights. Traditionally you would want at least one main key light and a second light for accenting.

The FalconEyes SO-48TD lights can be connected to one another wirelessly if you so choose. The benefits of this are allowing you to adjust all your lighting together. You can make an adjustment of color temperature or brightness on one and all connected lights will be adjusted automatically. The lights can be powered by both batteries and a wall socket. This makes the light very versatile if you would like to take it to a location where it can not be plugged into a wall. The unit has a nice touchscreen for controlling the brightness and temperature. The temperature range is from 3000K to 5600K and the brightness can be adjusted in 1% increments.

Another key feature of this light is that it replicates the use of a softbox and provides nice even soft lighting. This is achieved by a ring of LED lights around the outside of the fixture that point inward. The light is then reflected back out through a diffuser providing nice soft light without the bulk of big light boxes.

I think this is a great light for anyone looking to set up a YouTube studio in their home. The kit includes a nice travel case, however, you will need to purchase some light stands as they are not included in the package. I will include some links to the ones I use. They are good and solid and at an affordable price as well.

Three sizes of lights to choose from
FalconEyes SO-28TD: https://amzn.to/2Myhctr
FalconEyes SO-48TD: https://amzn.to/2vuzW6P
FalconEyes SO-68TD: https://amzn.to/2AY23QR

Neewer Light Stands: https://amzn.to/2OZSjsn

Batteries (2 different styles)
NP-F750/970: https://amzn.to/2vFx3jJ
or you can use the Sony V Mount style without an adapter
https://amzn.to/2ntBUQA

 


FalconEyes SO-48TD

 

FalconEyes SO-48TD

 

The removable wireless antenna of the FalconEyes SO-48TD.

 

V-Mount adapter of the FalconEyes SO-48TD

 

The touchscreen of the FalconEyes SO-48TD.

 

Removable battery adapter for the FalconEyes SO-48TD. When removed it reveals a V-Mount connector that can be used with Sony V-Mount batteries as well.

 

Back view of the FalconEyes SO-48TD.

 

FalconEyes SO-48TD

 

The FalconEyes SO-48TD comes with a nice carrying case.

Continue Reading

Trending