Connect with us

DJI Mavic 2 Pro/Zoom

LifThor Sif XXL The Ultimate Tablet Mount for DJI Mavic 2, Mavic Air and DJI Spark

Published

on

If you are in the market for a strong and durable tablet mount for you new DJI Mavic 2 Pro or Mavic 2 Zoom you might just want to take a look at the Lifthor SIF XXL mount. The Lifthor Sif XXL is capable of holding tablets from 9.7″ all the way up to 13″ This makes it compatible with the iPad Air, 9.7″ iPad Pro, 10.5″ iPad Pro and the 12.9″ iPad Pro. This mount system works with the DJI Spark, Original Mavic Pro/Platinum, DJI Mavic Air and the new DJI Mavic 2 Pro/Zoom models.

What really drew me to this setup when looking for a mount I could use with a larger iPad is how durable it is. If you have used other mounting systems in the past you know that some cheaply built mounts are not very secure and you will find your iPad bouncing around and quite wobbly. The LifThore Sif XXL is rock solid yet still extremely light to hold. Another key benefit to this system is the fact that all your controls are completely visible when a larger iPad is mounted. Other mounts tend to block your view of controls and you are constantly tipping the device just to see your buttons.

The LifThore Sif mounting system can be changed up at any time. If you change the size of your tablet you don’t have to re-purchase a whole new kit. You simply have to swap out the clamp to accommodate the new size of phone or tablet. There are optional accessories like lanyards to hang it around your neck you can even purchase a sunscreen to help you view the screen on really bright days.

Watch our full video review of the LifThor Sif XXL tablet mount on YouTube and visit Thors Drone World to purchase.

 

Lifthor Sif XXL Tablet Mount for DJI Spark, Mavic Pro, Mavic Air, Mavic 2 Pro, Mavic 2 Zoom.

 

Lifthor Sif XXL Tablet Mount with a 10.5″ iPad Pro mounted.

 

Lifthor Sif XXL Tablet Mount for DJI Spark, Mavic Pro, Mavic Air, Mavic 2 Pro, Mavic 2 Zoom.

 

The mounting plate fits perfectly into the remote.

 

Lifthor Sif XXL Tablet Mount for DJI Spark, Mavic Pro, Mavic Air, Mavic 2 Pro, Mavic 2 Zoom.

 

A nice data cable is included for connecting your remote to your tablet.

 

Option sunshade for the Lifthor Sif XXL Tablet Mount. Comes in a variety of sizes to suit any tablet size.

 

The included lanyard that comes with the Lifthor Sif XXL Tablet Mount.

 

The Lifthor Sif XXL Tablet Mount breaks down easily for packing in a backpack or drone case.

 


Continue Reading
Click to comment

Leave a Reply

DJI Mavic 2 Pro/Zoom

DJI Smart Controller Now Supports Waypoints 2.0 | Firmware Update

Published

on

This is just a quick update, as of yesterday the DJI Smart Controller now supports the new intelligent flight mode WayPoints 2.0. This feature was rolled out last week first for iOS devices and then some Android devices a few days later. Unfortunately, the update was not yet released for the DJI Smart controller which angered many who have purchased it, with good reason. These premium devices sold by DJI are not cheap and customers expect to have new features alongside everyone else, not weeks or months later … if at all! This is true for the Crystal Sky as well, updates seem to trickle in at a very slow rate. As of writing this article, there is no update yet to bring WayPoints 2.0 to Crystal Sky. Right now you can download the DJI Smart Controller firmware update, you should be prompted to install the update when you launch the Go 4 App on the Smart Controller. If the update screen does not come up automatically, you can manually prompt an update from the settings menu in the Go 4 app. I will make an updated post when Waypoints 2.0 has been added to Crystal Sky.

DJI Smart Controller: http://bit.ly/2FViHlU
DJI Mavic 2: http://bit.ly/2PVuaDU

Watch the video below to see a demonstration of Waypoints 2.0 on the DJI Smart Controller.

 


Continue Reading

DJI Crystal Sky

DJI Smart Remote Overview And Thoughts

Published

on

Around the time last summer when the Dji Mavic 2 Pro and Mavic Zoom were released, there were leaked photos floating around showing a remote that had a built-in screen and was reported to be a new integrated remote for the Mavic 2 series. Fast forward to January 2019, DJI official launched this new Smart Remote at CES. It was listed on their website as out of stock for a while and first became available for purchase in European countries, then in Canada and a few days later in the U.S. However it was sold out in a few days and at the time of writing this article it has been listed as out of stock again.

The DJI Smart Controller is an all in one unit with a build in 5.5-inch screen. It runs on a modified version of Android and has all the apps needed to fly youR Mavic 2 built-in to the unit. The screen is similar to the existing Crystal Sky monitors and has a super bright 1000 nit screen, this makes for easier viewing on bright days. The DJI Smart controller has many useful built-in tools and features such as an HDMI out port allowing you to connect the remote to an external monitor. It has a Micro SD card slot allowing you to transfer and view your drone videos and photos. There is a new feature called GoShare and is a way to connect and transfer your drone media to your smartphone or tablet.

One of the biggest complaints of DJI’s new Smart Controller is the price, it comes in at $649 U.S which does sting the wallet quite a bit. There is now an option when purchasing a brand new Mavic 2 drone that allows you to bundle in the Smart Remote instead of the stock remote, this does save a little money. However, it is a bit of a slap in the face for those who purchased the Mavic 2 early on as no discounts are offered.

Price aside, I am really enjoying this remote, the new DJI Smart Controller makes setting up and deploying your drone so much faster with less hassle. You don’t have to worry about making sure your phone is charged or putting it into airplane mode so you don’t get distracting calls and messages. It feels comfortable to hold and just performs like a premium device. You can install 3rd party apps as well if you so choose. All in all, it is well worth the money for me, of course, I wish it was cheaper and feel a price tag of $500 would have been better suited.

One drawback to using this remote is getting updates later than iOS or Android phones. This has been a common problem even when using the Crystal Sky. Compatibility and feature updates seem to always trickle in sometimes months down the road. This is true for DJI’s latest Go4 App update that included a new intelligent flight mode “Waypoints 2.0”. Unfortunately, it is not yet available on the new DJI Smart Controller or Crystal Sky and may not be for some time which is very unfortunate. This is very backward in my opinion, customers who have paid for premium devices should not be punished by lack of updates or features. Premium devices if anything should have updates made to them first. I think this would be a good selling point for DJI if they offered the first crack at new features and updates to those who have purchased premium devices.

Watch our unboxing and review video below.

DJI Smart Controller: http://bit.ly/2FViHlU
DJI Mavic 2: http://bit.ly/2PVuaDU

 

 


Continue Reading

Trending