Step-by-Step Guide: How to Update Firmware on the DJI Osmo Action 5 Pro

Updating the firmware on your DJI Osmo Action 5 Pro is crucial to ensure optimal performance, new feature access, and bug fixes. DJI provides two main methods to update the firmware: using the DJI Mimo app (automatic) and updating manually via microSD card. Both are simple and safe when followed correctly.

This guide also works for the following DJI action camera models:

• DJI Osmo Action (original)
• DJI Osmo Action 3
• DJI Osmo Action 4
• DJI Osmo Action 5 Pro

🔄 Method 1: Automatic Update Using DJI Mimo App (Recommended)

What You Need:

• DJI Osmo Action 5 Pro
• Smartphone with the DJI Mimo app installed
• Internet connection
• Fully charged camera and phone
• USB-C cable (if connecting via cable)

Steps:

1. Power On the Camera
   Turn on your DJI Osmo Action 5 Pro.
2. Connect to Your Smartphone
   Open the DJI Mimo app on your phone. Connect your camera via Bluetooth/Wi-Fi or with a USB-C cable depending on your preference.
3. Check for Firmware Updates
   Once connected, the app will automatically check for firmware updates. If a new version is available, a prompt will appear.
4. Download the Update
   Tap “Download” to begin retrieving the update file to your phone.
5. Install the Firmware
   After downloading, the app will automatically push the firmware to your camera. Follow on-screen instructions. The camera will restart during the process — this is normal.
6. Complete & Reboot
   Once the update is complete, the camera will reboot. Check the firmware version under Settings > About to confirm the update was successful.

💾 Method 2: Manual Update via microSD Card

What You Need:

• DJI Osmo Action 5 Pro
• A computer with internet access
• microSD card (formatted FAT32)
• USB card reader or SD adapter
• Fully charged camera

Steps:

1. Download Firmware File
   On your computer, download the latest firmware file for the DJI Osmo Action 5 Pro from DJI’s official source.
2. Insert microSD into Computer
   Connect your microSD card to your computer using a card reader.
3. Copy Firmware File
   Drag and drop the firmware file into the root directory of the microSD card (not inside any folder).
4. Insert microSD into Camera
   Safely eject the microSD card and insert it into your DJI Osmo Action 5 Pro.
5. Power On the Camera
   Turn on the camera. It will automatically detect the firmware file and begin the update.
6. Wait for Update to Complete
   Do not power off or remove the battery during the update. The screen may go black or show a progress indicator. It usually takes a few minutes.
7. Camera Reboots Automatically
   Once complete, the camera will reboot. You can verify the update in Settings > About.

⚠️ Important Tips:

• Ensure your battery is at least 50% charged before updating.
• Do not power off or remove the microSD card during an update.
• Use an official DJI Recommended or high-quality SD card to avoid update errors.
• If the update fails, format the card and try again or use the alternate method.

By following these steps, your DJI Osmo Action 5 Pro (and other supported models) will stay up to date with the latest improvements, fixes, and performance boosts.